一、根文件系统预备知识

目录 内容

bin 存放所有用户都可以使用的、基本的命令。

sbin 存放的是基本的系统命令，它们用于启动系统、修复系统等。

usr 里面存放的是共享、只读的程序和数据。

proc 这是个空目录，常作为proc文件系统的挂载点。

dev 该目录存放设备文件和其它特殊文件。

etc 存放系统配置文件，包括启动文件。

lib 存放共享库和可加载块(即驱动程序)，共享库用于启动系统、运行根文件系统中的可执行程序。

boot 引导加载程序使用的静态文件

home 用户主目录，包括供服务账号锁使用的主目录，如FTP

mnt 用于临时挂接某个文件系统的挂接点，通常是空目录。也可以在里面创建空的子目录。

opt 给主机额外安装软件所摆放的目录。

root root用户的主目录

tmp 存放临时文件，通常是空目录。

var 存放可变的数据。

1、建立根文件系统目录 

#!/bin/sh
echo "------Create rootfs directons start...--------"
mkdir rootfs
cd rootfs
echo "--------Create root,dev....----------"
mkdir root dev etc boot tmp var sys proc lib mnt home
mkdir etc/init.d etc/rc.d etc/sysconfig
mkdir usr/sbin usr/bin usr/lib usr/modules
echo "make node in dev/console dev/null"
mknod -m 600 dev/console c 5 1
mknod -m 600 dev/null    c 1 3
 
mkdir mnt/etc mnt/jffs2 mnt/yaffs mnt/data mnt/temp
mkdir var/lib var/lock var/run var/tmp
chmod 1777 tmp
chmod 1777 var/tmp
echo "-------make direction done---------"

2、建立动态链接库 

cd /mnt/hgfs/share
tar –zxvf root_qtopia.tgz –C /opt/studyarm
cp –rfd /opt/studyarm/root_qtopia/lib/* /opt/studyarm/rootfs/lib/*

3、交叉编译Bosybox

1、解压busybox 

cd /mnt/hgfs/share
tar –zxvf busybox-1.13.3.tar.tgz –C /opt/studyarm
cd /opt/studyarm/busybox-1.13.3
CROSS_COMPILE ?=arm-linux-   //第164行
ARCH ?=arm //第189行

更多linux内核视频教程文档资料免费领取后台私信【内核】自行获取.

怎么制作系统文件（linux制作根文件系统的必要步骤）(1)

Linux内核源码/内存调优/文件系统/进程管理/设备驱动/网络协议栈-学习视频教程-腾讯课堂

4、配置busybox

(1)、Busybox Settings---> General Configuration---> 

[*] Show verbose applet usage messages
[*] Store applet usage messages in compressed form
[*] Support –install [-s] to install applet links at runtime
[*] Enable locale support(system needs locale for this to work)
[*] Support for –long-options
[*] Use the devpts filesystem for unix98 PTYs
[*] Support writing pidfiles
[*] Runtime SUID/SGID configuration via /etc/busybox.config
[*]  Suppress warning message if /etc/busybox.conf is not readable
Build Options--->
     [*] Build BusyBox as a static binary(no shared libs)
[*] Build with Large File Support(for accessing files>2GB)
Installation Options->
[]Don’t use /usr
Applets links (as soft-links) --->
(./_install) BusyBox installation prefix
Busybox Library Tuning --->
(6)Minimum password legth
(2)MD5:Trade Bytes for Speed
[*]Fsater /proc scanning code(+100bytes)
[*]Command line editing
(1024)Maximum length of input
[*] vi-style line editing commands
(15) History size
[*] History saving
[*] Tab completion
[*]Fancy shell prompts
(4) Copy buffer size ,in kilobytes
[*]Use ioctl names rather than hex values in error messages
[*]Support infiniband HW

(2)、Linux Module Utilities---> (/lib/modules)Default directory containing modules (modules.dep)Default name of modules.dep 

[*] insmod
[*] rmmod
[*] lsmod
[*] modprobe
-----options common to multiple modutils
[ ] support version 2.2/2.4 Linux kernels
[*]Support tainted module checking with new kernels
[*]Support for module .aliases file
[*] support for modules.symbols file

(3)、在busybox中配置对dev下设备类型的支持 

Linux System Utilities  --->               
    [*]Support /etc/mdev.conf         
    [*]Support command execution at device addition/removal

5、编译busybox

编译busybox到指定目录： cd /opt/studyarm/busybox-1.13.3 make CONFIG_PREFIX=/opt/studyarm/rootfs install 在rootfs目录下会生成目录bin、sbin、usr和文件linuxrc的内容。

  1. etc/mdev.conf文件，内容为空。
  2. 拷贝主机etc目录下的passwd、group、shadow文件到rootfs/etc目录下。
  3. etc/sysconfig目录下新建文件HOSTNAME，内容为”MrFeng”。
  4. etc/inittab文件： 
#etc/inittab
::sysinit:/etc/init.d/rcS
::askfirst:-/bin/sh
::ctrlaltdel:/sbin/reboot
::shutdown:/bin/umount -a –r

6、etc/init.d/rcS文件： 

#!/bin/sh
PATH=/sbin:/bin:/usr/sbin:/usr/bin
runlevel=S
prevlevel=N
umask 022
export PATH runlevel prevlevel
echo "----------munt all----------------"
mount -a
echo /sbin/mdev>/proc/sys/kernel/hotplug
mdev -s
echo "***********************************************"
echo "****************Studying ARM*********************"
echo "Kernel version:linux-2.6.29.1"
echo "Student:Feng dong rui"
echo "Date:2009.07.15"
echo "***********************************************"
/bin/hostname -F /etc/sysconfig/HOSTNAME
Chmod +x rcS

7、etc/fstab文件： 

#device    mount-point     type     option     dump   fsck   order
proc          /proc        proc     defaults    0        0
none          /tmp        ramfs    defaults    0        0
sysfs         /sys          sysfs    defaults    0        0
mdev          /dev        ramfs    defaults    0        0

8、etc/profile文件： 

#Ash profile
#vim:syntax=sh
#No core file by defaults
#ulimit -S -c 0>/dev/null 2>&1
USER="id -un"
LOGNAME=$USER
PS1='[\u@\h=W]#'
PATH=$PATH
HOSTNAME='/bin/hostname'
export USER LOGNAME PS1 PATH
cd /mnt/hgfs/share
tar –zxvf mkyaffs2image.tgz –C /

二、启动系统 

VIVI version 0.1.4 (root@capcross) (gcc version 2.95.3 20010315 (release)) #0.1.4 Mon Oct 27 10:18:15 CST 2008
MMU table base address = 0x33DFC000
Succeed memory mapping.
DIVN_UPLL0
MPLLVal [M:7fh,P:2h,S:1h]
CLKDIVN:5h

+---------------------------------------------+
| S3C2440A USB Downloader ver R0.03 2004 Jan  |
+---------------------------------------------+
USB: IN_ENDPOINT:1 OUT_ENDPOINT:3
FORMAT: <ADDR(DATA):4>+<SIZE(n+10):4>+<DATA:n>+<CS:2>
NOTE: Power off/on or press the reset button for 1 sec
      in order to get a valid USB device address.
NAND device: Manufacture ID: 0xec, Chip ID: 0x76 (Samsung K9D1208V0M)
Found saved vivi parameters.
Press Return to start the LINUX/Wince now, any other key for vivi
Copy linux kernel from 0x00050000 to 0x30008000, size = 0x00200000 ... done
zImage magic = 0x016f2818
Setup linux parameters at 0x30000100
linux command line is: "noinitrd root=/dev/mtdblock2 init=/linuxrc console=ttySAC0"
MACH_TYPE = 362
NOW, Booting Linux......
Uncompressing Linux.......................................................................................................................... done, booting the kernel.
Linux version 2.6.29.1 (root@localhost.localdomain) (gcc version 4.3.2 (Sourcery G++ Lite 2008q3-72) ) #8 Sat Jul 18 10:37:22 CST 2009
CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177
CPU: VIVT data cache, VIVT instruction cache
Machine: Study-S3C2440
ATAG_INITRD is deprecated; please update your bootloader.
Memory policy: ECC disabled, Data cache writeback
CPU S3C2440A (id 0x32440001)
S3C24XX Clocks, (c) 2004 Simtec Electronics
S3C244X: core 405.000 MHz, memory 101.250 MHz, peripheral 50.625 MHz
CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
Kernel command line: noinitrd root=/dev/mtdblock2 init=/linuxrc console=ttySAC0
irq: clearing pending status 02000000
irq: clearing subpending status 00000002
PID hash table entries: 256 (order: 8, 1024 bytes)
Console: colour dummy device 80x30
console [ttySAC0] enabled
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 64MB = 64MB total
Memory: 60876KB available (3536K code, 293K data, 136K init)
Calibrating delay loop... 201.93 BogoMIPS (lpj=504832)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
net_namespace: 296 bytes
NET: Registered protocol family 16
S3C2410 Power Management, (c) 2004 Simtec Electronics
S3C2440: Initialising architecture
S3C2440: IRQ Support
S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics
DMA channel 0 at c4808000, irq 33
DMA channel 1 at c4808040, irq 34
DMA channel 2 at c4808080, irq 35
DMA channel 3 at c48080c0, irq 36
S3C244X: Clock Support, DVS off
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
NET: Registered protocol family 1
NTFS driver 2.1.29 [Flags: R/O].
yaffs Jul 18 2009 10:31:41 Installing. 
msgmni has been set to 119
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Console: switching to colour frame buffer device 30x40
fb0: s3c2410fb frame buffer device
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
s3c2440-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2440
s3c2440-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2440
s3c2440-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2440
brd: module loaded
loop: module loaded
dm9000 Ethernet Driver, V1.31
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
ide-cd driver 5.00
Driver 'sd' needs updating - please use bus_type methods
S3C24XX NAND Driver, (c) 2004 Simtec Electronics
s3c2440-nand s3c2440-nand: Tacls=1, 9ns Twrph0=4 39ns, Twrph1=1 9ns
NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit)
Scanning device for bad blocks
Creating 3 MTD partitions on "NAND 64MiB 3,3V 8-bit":
0x000000000000-0x000000030000 : "boot"
0x000000050000-0x000000250000 : "kernel"
0x000000250000-0x000003ffc000 : "kernel"
usbmon: debugfs is not available
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
s3c2410-ohci s3c2410-ohci: S3C24XX OHCI
s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: S3C24XX OHCI
usb usb1: Manufacturer: Linux 2.6.29.1 ohci_hcd
usb usb1: SerialNumber: s3c24xx
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usbcore: registered new interface driver libusual
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
USB Serial support registered for FTDI USB Serial Device
usbcore: registered new interface driver ftdi_sio
ftdi_sio: v1.4.3:USB FTDI Serial Converters Driver
USB Serial support registered for pl2303
usbcore: registered new interface driver pl2303
pl2303: Prolific PL2303 USB to serial adaptor driver
s3c2410_udc: debugfs dir creation failed -19
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
s3c2440-i2c s3c2440-i2c: slave address 0x10
s3c2440-i2c s3c2440-i2c: bus frequency set to 98 KHz
s3c2440-i2c s3c2440-i2c: i2c-0: S3C I2C adapter
S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled
TCP cubic registered
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
yaffs: dev is 32505858 name is "mtdblock2"
yaffs: passed flags ""
yaffs: Attempting MTD mount on 31.2, "mtdblock2"
yaffs_read_super: isCheckpointed 0
VFS: Mounted root (yaffs filesystem) on device 31:2.
Freeing init memory: 136K
----------munt all----------------
***********************************************
Kernel version:linux-2.6.29.1
USER:Baozhongchao
Date:2009.07.15
***********************************************
Please press Enter to activate this console. 
[@MrFeng=W]#ls
bin         etc         linuxrc     proc        sys         var
boot        home        lost+found  root        tmp         www
dev         lib         mnt         sbin        usr
[@MrFeng=W]#